ECO-40
$0.00
Our environmentally friendly ECO 40 Foam insulation isresidential and commercial grade rigid foam insulation madeusing post- consumer type 6 recycled polystyrene. Produced byusing environmentally friendly techniques and post consumerrecycled materials, ECO 40 Foam insulation is an industryleading product in the effort to reduce plastics waste while alsomeeting or exceeding all regulatory requirements. ECO 40 Foaminsulation is ideal for all your structural, non-structural, andunderground needs.
With a psi of 40, this product is ideal for a wide-range of applications from residential to commercial.
ECO-40 is a high-strength, cost-efficient, and eco-friendly XPS insulation made from recycled polystyrene, boasting a PSI strength of 40. This versatile insulation solution is designed for a wide range of residential, commercial, industrial, and civil applications, providing both sustainability and durability.
COMPLIANCE
CAN/ULC S701.1:2017;
ASTM C578-19;
S102.2-18;
UL 723 (2018)
ENVIRONMENTALLY FRIENDLY INSULATION
We make earth-friendly home and commercial grade insulation XPS foam made from recycled type 6 plastic. What we do is take small granules of polystyrene which come from your common appliance packing material and scraps from rigid insulation and put it through an extrusion process that creates a thin sheet of XPS foam insulation with a high R-Value rating. It is sure to keep the heat in on those cold winter days saving you money on your monthly energy bills.
ETL CERTIFIED
We make high-quality products. So high quality that our products have earned the right to display the ETL Mark. The ETL Mark is proof of product compliance to North American safety standards. Both Canada and USA officials recognize this mark as quality and consumers recognize it as a symbol of safety.
Quantity
PRODUCT SPECS
PRODUCT DATA
| CAN/ULC S701.1:2017 | ASTM C578-19 | |
| Thickness | 50 mm | 2” |
| Compressive Strength | 386 kPa | 40 psi |
| Water Absorption (% by volume) |
0.4 | 0.2 |
| Water Vapor Permeance | 45 ng/Pa·s·m2 | 0.71 Perm2 |
| Dimensional Stability (Linear % Change) |
1.4 | 1.4 1.8 |
| Flexural Stength | 565 kPa | 82 psi |
| Density | - | 2.38 lb/ft3 |
THERMAL
| Thermal Resistance | 1.66 (m²·°C/W) | 5.2R per inch |
| Surface Burning Characteristics | 140 (FSR) | See Below Table |
SURFACE BURNING CHARACTERISTICS
| S102.2-18 | UL 723 (2018) | |
| Thickness | 51 mm | 2” |
| Flame Spread Ceiling Burn Only1 Ceiling Burn Only1 |
140 rating - - |
- 0 index 0 index |
| Smoke Developed Ceiling Burn Only1 Ceiling Burn Only1 |
445 classification - - |
- 0 index 5 index |
1 These numerical flame spread and smoke developed ratings are not intended to reflect hazards presented by thismaterial under actual fire conditions. All applicable building codes must be followed.
HANDLING & STORAGE
ECO 40 Foam insulation is an environmentally friendly
non-reactive product. Store in accordance with local regulations
and away from all ignition sources or open flame. Store in
original container protected from direct sunlight in a dry, cool
and well-ventilated area, away from incompatible materials,
food, and drink.
HEALTH & SAFETY
It is recommended that appropriate personal protective
equipment be worn while handling ECO 40 Foam insulation.
ECO 40 Foam insulation should be stored and installed away
from sources of ignition and open flame. For further guidance
please refer to the Safety Data Sheet.